DURALABEL PRO 300 WINDOWS 7 DRIVER DOWNLOAD

0 Comments

DuraLabel Toro Software Navigation. If you have a manual cutter, operate it by pressing down firmly on the lighter-colored actuator. Turn off the printer, and wait about five seconds. Go to the Ports tab, and look for the port that is currently selected in that list. If the latches are not catching, please contact our support team for help.

Uploader: Dolkree
Date Added: 2 July 2015
File Size: 27.32 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 88421
Price: Free* [*Free Regsitration Required]

If you see more than one entry for djralabel same printer, stop, and contact our support team for help. The ribbon should roll down the back of the back roller, forward through the wide-open part of the printer, up across the metal print head, and onto the front of the front roller.

Those guides should overlap over the edges of the label stock, slightly.

Mode for a continuous roll of uninterrupted label stock Once you’ve selected a mode, choose Automatic to have the printer align the label stock and prepare its sensors. Petroleum-Resistant ribbon has part numbers ending in 20; Premium ribbon has part numbers durakabel in If you have run out of label stock, load a new roll. Under Media Settings, change Type to Continuous. Navigate through the main menu again to Setup. Your labels print as they appeared.

  EVO-W541USB WIRELESS USB ADAPTER DRIVER

DuraLabel PRO Series

Then, turn off the printer, give it a few seconds, and turn it on again. You may need to apply some downward pressure at the front corners of the printer. To print the manual completely, please, download it.

This happens most often with below-freezing temperatures; allow the system to reach normal temperatures, and try again.

Make sure the printing ribbon is passing above the black plastic ribbon sensor, and not blocking it from view. Kingston Fcr-hs Driver Download Try opening the lid the whole top half of the machine all the way, and closing it again.

The next dudalabel, Occurrenceshould be set to After Every Page. After a short pause, you’ll be returned to the main menu. This can happen by accident when supplies are changed, and is easy to resolve. I would like to receive emails to keep me safe!

Printer Support – Drivers, Manuals & More | Graphic Products

Comments to this Manuals Your Name. Cleaning the DuraLabel Lobo. We are here to help. Once you’ve selected a mode, choose Automatic to have the printer align the label stock and prepare its sensors.

  JNC USB-350 DRIVER DOWNLOAD

Figure 6 Paper core winodws. Then, access the printer controls:. The printer is waiting for the cutter mechanism.

Graphic Products DuraLabel PRO 300 Free Driver Download

Wait about five seconds, and turn the printer on again. Usually, this setting should be on Cutbut wundows may be set to None if no cutting is desired. You can store the Templates and Symbols folder in any convenient location on your computer.

Print any label, anywhere With the DLPyou can easily print signs and labels to withstand most any condition nature or industry can dole out. Correct this selection, and click OK to save changes and close this window. Minimize any open windows until you can see the Toro home screen, and click ;ro the printer icon in the taskbar. The printer may also print out the labels that you were waiting for.

Page 42 Replace the cutting mechanism, inserting the tabs on the sides of the cutter, into the slots as shown below.