Already have an account? TechSpot Account Sign up for free , it takes 30 seconds. Make sure the Ethernet cable is securely connected to both the product and your router, access point, switch, or hub. If you want to make network settings, remove the memory card from the printer before beginning setup. Do you already have an account? Network setup was unsuccessful. For details, see the instruction manual for the router or access point.

Uploader: Tuktilar
Date Added: 6 March 2010
File Size: 35.40 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 52104
Price: Free* [*Free Regsitration Required]

Devices on the same network can communicate with each other. To change to another router or Ad Hoc connection: It would be better to open up a new thread of your own. Also, when changing the wireless LAN connection, make a note of the broadband router access point and cannoot settings because you need the SSID and security settings during setup. To make sure that printers on the network are being displayed, check to epsonet if the network is working correctly.

Before changing the printer connection method or environment, check that the network you are changing to is operating correctly. The product cannot find or connect to the wireless router or access point. Select the connection method that ccannot want to change. Make sure that the product is within range of your router or access point.


Yes, my password is: TechSpot is dedicated to computer enthusiasts and power users.

Using EpsonNet Setup

Do you already fond an account? The second part is called the “host address” and indicates the network device. To allow communication, the same security mode has to be set between the network device and the printer. If you are using an access point, then your network already had a name when the access point epsknnet set up. Before changing the printer connection method, check that the network you are changing to is operating correctly.

Place your printer close to the access point. Try connecting the product to another router, access point, switch or hub.

Perform the following to improve the environment: The messages above are displayed when the selected or entered wireless network name SSID is not found during network setup. Under Hardware and Sound, click Use a printer. Confirm default gateway setup.

Check that the PC you want to connect to is turned on. Avoid placing the product near a microwave oven, 2. Try connecting the product to your router, access point, switch, or hub with another Ethernet cable. On the Select Settings screen, select Printer and computer settingsand then click Next.


The security key set for the access point and the entered security key do not match. Check the IP address for the router or access point connected to your PC.

If network communication was interrupted while starting Epson Scan, exit Epson Scan, and restart it after a few seconds. If you have used the WEP security mode for your access point to enable Shared authentication, confirm that both authentication key and index are correct. Try printing from another computer on the network fin see if the problem persists. If so, you need to peer it with your Windows 7 PC.

i can’t connect my epson printer to my laptop by wifi.

You can follow the question or vote as helpful, but you cannot reply to this thread. Avoid placing the product next to a microwave oven, 2.

If your wireless router or access point has wireless security enabled, you will also need to know what kind of security it is using.