To clean the tops of the keys or the keyboard body, follow the procedures described in 5. When installing an expansion card, hold the card just above the expansion slot on the system board then move the card toward the rear of the chassis so that the bracket on the card is aligned with the open slot on the rear of the chassis 1. Lift up the lever that secure the fan to the heatsink 1 and rotate the fan up 2. Solving Audio Problems Front Bezel Front Bezel 1. Expansion Slot Cover

Uploader: Nikorn
Date Added: 21 April 2017
File Size: 34.75 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 4248
Price: Free* [*Free Regsitration Required]

Restoring The Software Verify proper memory module type. Got it, continue to print. Remove compsq access panel and rotate the computer so the system board is parallel to the table to make it easier to work on 3.

Lift the expansion card straight up then pull it in toward the center of the chassis to release it from the chassis frame. Primary Hard Drive Yp System – Windows 7, Windows 8, Windows 8. Disconnect all cables connected to the system board, noting their location for reinstallation.


Turn power off, then on to reboot.

HP Compaq DC MT MiniTower Computer P4 1GB 40GB Win XP Pro Installed with COA | eBay

Additional Drive Dc50000 Notes POST checks the following items to ensure that the computer system is functioning properly: How does HP install software and gather data?

On the rear of the computer, slide the slot cover lock up to access the expansion slot covers. Security features available on select models help to prevent unauthorized access to the internal components of the personal computer. There are 1 items available.

If you install a plug and play device, Windows XP automatically recognize the device and configure the computer. Remove selected files Download files.

Power Switch Assembly 6. Is my Windows version bit or bit? I don’t see my operating system.


Page 24 Setup Utilities and Diagnostics Features 4. HP Compaq dc MicroTower dzavdec. This item may be a floor model or an item that has been returned to the seller after netork period of use.

Disconnect three attaching cables from the system board: Pre-video graphics For systems with a graphics xompaq Skip to main content. The memory sockets on the system board can be populated with industry-standard DIMMs. Before removing the computer access panel, ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet.


Lay the computer on its side with the open side facing up. Often the spark is netwwork felt nor heard, but damage occurs. Using Computer Setup f10 Utilities If you install a non—plug and play device, you must reconfigure the computer after completing installation of the new hardware.

HP Compaq dc5000 MT Reference Manual

Front Bezel Front Bezel 1. Voltage is always present on the system board when the computer is plugged into an active AC outlet. The list of recommended drivers for your product has not changed since the last time you visited this page. External Security Devices As shown, there are two acceptable methods for using comlaq cable lock.

Fault Notification And Recovery