At the management landing page users have all the important stats at their fingertips, including connected hosts, real-time transfer speeds, connected array ports, storage capacity, as well as utilization. Product Family StorageWorks P When I try to upload the CP Please note, as with all cluster multiple host access enabled filesystems, make sure you take care as for following the guidelines that Microsoft has laid out for multiple initiator access to the filesystem to avoid corruption due to mis-configuration. Storage snapshot capabilities are built in to the MSA

Uploader: Shajar
Date Added: 24 January 2017
File Size: 61.33 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 53002
Price: Free* [*Free Regsitration Required]

The first PART you mentioned may be overkill, while the second item you listed may not be enough.

HP MSA CONTROLLER SCSI Array Device/MSA missin – Hewlett Packard Enterprise Community

And also pictures of the SFP ports and the connection ports. Trying to answering my own questions: What Is a Disk Array? If you have to do 3 VMware hosts. Two LUNs were leveraged, balanced across both controllers. The Volumes tab as the name implies is where you are able to create and provision storage. When I received it from HPe, they had 2 loaded in to each controller. All testing was performed over 16Gb FC, two ports per controller. My requirement is only to run 10 Max virtual servers and 3 TB of usable storage for file serving.


I also recently deployed a similar updated with Gen9 Servers solutions for a client using this part for the DAC: Normally I would recommend keeping the SAN and data network separate. The device can also take up to 24 TB of storage at maximum. The simulation servers do not have cluster setup.

To put this in perspective, the fastest all-flash array we’ve tested to date measured 9. I would then also have a completely separate physical network arfay data to the local area network you could use link aggregation or bonding for LAN access.

As always, you can also check the best practice documents which should explain everyting: Or are you using a switch 10GB to connect? Paired with a ssd read ecsi can be only one ssd this storage is nuts!

Keep in mind that with more disks in a RAID volume, the more speed you have. Failed to successfully update disk firmware.

How do you get them to change to iSCSI? The first includes 3. These are classified into categories of network attached storage NASstorage area network SANand storage virtualization.

HPE MSA 2052 SAN Storage Review

HP H The server: Behind the HPE bezel sit the 24 drive carriers. Should an MSA owner decide to add flash later, the process is as straightforward as adding the drives to the system and enabling caching or tiering after an appropriate license is applied. Keep in mind this is a test demo environment for showcasing the technologies and their capabilities.


I can verify both work. After reinstallation and validating all IP connectivity then you read the remote host and reattach the volume. Show only see all.

Have you upgraded your MSA to the latest firmware? The servers has two NICs each one. Did you use the cables listed in the Quickspecs compatibility document?

On this unit, SSD cache is read-only, so only read activity is accelerated.

Now it was time to configure the unit and start playing. With your experience, what is better?