Open the misfeed-clearing guide for the fuser unit, and then, while checking the misfeed, pull the jammed media down to remove it. Page 15 Click Apply. Consumable Life Expectancies The actual life expectancy will vary depending on these and other printing variables, including continuous or intermittent printing, ambient temperature, and humidity. Waste Toner Contact your local vendor or www. I need power and lots of it.

Uploader: Teshakar
Date Added: 20 October 2014
File Size: 18.59 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 62683
Price: Free* [*Free Regsitration Required]

Click the Capacity option or Do not set collation in the application.

Replacing The Opc Drum Cartridge If you open the door before the Ready indicator on the control panel lights up and the Error indica- tor goes off, the printer stops and repeats the calibration cycle. Konica minolta magicolor w: Monochrome ppm Monochrome ppm 3.

Solvusoft: Microsoft Gold Certified Company

If the media stacks too high, your printer may experience media jams and excessive media curl. Cut-sheet The maximum media weight supported for duplex printing If the printer is to be used as the default printer, select Yes.

Attention Meaning of Symbols A triangle indicates a danger against which you should take precaution. magiccoor

Output Tray Output Tray All media is output to the output tray on top of the printer. The use of non-shielded cable is likely to result in interference with radio communications, and is prohibited under EU directives.


Monthly Duty Cycle max. Page 92 Symptom Cause Printing The printer is set to a takes too slow printing mode much time.

The amount of data to Turn the printer off, and be printed exceeds then, after a few the printer’s internal seconds, turn it on data transmission again. Pull the right-side door release lever, and open the right-side door. Page 71 Do not tilt, lubricate, or disassemble the printer.


This declaration is valid for the areas of the European Union. The media is picked from Tray 1, passed between the transfer belt and the transfer roller, passed through the fuser, and delivered via the paper exit unit to the output tray on top of the printer.

Inside The Printer Maagiccolor the right door release lever, and then carefully open the right door. Duplexing custom-sized media, envelopes, labels, postcards, thick stock, or transparencies is not supported. Solving Problems with Media Jams The toner magiccolir is damaged. If it is difficult to remove the jammed Notes on your safety and operating safety Working improperly with the printer can result in health hazards, electric shocks and even fires.


Media feed roller Media guide Cleaning the Printer Do not fan transparencies before loading them. If the pencil rolls, the surface is not level. Authorization number you received from your customer support representative on the outside of the carton before shipping the printer. Printer Media Media Load Type. Remove the OHP media and load it in the tray one sheet at a time. The toner cartridge is leaking. Page 60 Check the color and size volume written on the magiccoor cartridge to be installed.

Konica Minolta magicolor W – printer – color – laser Overview – CNET

Best headphone deals for Christmas: Rotate the transfer belt release lever counterclockwise to its correct 7: Click this radio button to display a sample of the page layout in the figure area.

When the background of the right-hand printer graphic is red, there is an error and the job has been interrupted. Do-it-all budget printer is a perfect fit for tight spaces Do-it-all budget printer is a perfect fit for tight spaces by Justin Yu.